HOMEABOUT USHEALTH ISSUESAIR PURIFICATION SYSTEMINSPECTIONPROCEDURESRESIDENTIALCOMMERCIALMRSACONTACT
 

Equipment

Several types of equipment may be used in the decontamination process and may include:   

Moisture meter: a tool that measures the moisture level in building materials. It can also be used to measure the progress of the drying of damaged materials. Moisture meters have a small probe that is inserted into the material, or pressed directly against the material's surface. Moisture meters can be used on carpet, wallboard, woods, brick, and other masonry.

Humidity gauge: measures the amount of humidity in the indoor environment. Often gauges are paired with a thermometer to measure the temperature.

Bore scope: a hand-held tool that allows the user to see potential mold problems inside walls, ceilings, crawl spaces, and other tight spaces. It consists of a camera on the end of a flexible “snake”. No major drilling or cutting of dry wall is required.

Digital Camera: used to document findings during assessment.

PPE: includes respirators, gloves, impervious suit, and eye protection. These items can be used during the assessment and remediation processes.

Thermo graphic Camera Infra-red inspection with a thermo graphic camera is a powerful and noninvasive means of monitoring and diagnosing the condition of buildings residential or commercial. It quickly identifies problem areas that cannot be seen by the naked eye and eliminates older more costly inspection techniques that require a lot of labor and destructive probing.

AAC Air Scrubbers -  Commercial size high capacity machines and each machine can move, filter and clean up to 2200 cubic feet of air per minute (CFM). These machines have triple stage filtration with HEPA filters. HEPA filter will capture small particles such as mold, bacteria, asbestos, lead and more. Using an air scrubber during mold cleanup is extremely important for health and liability reasons. If mold or other hazardous materials are released in the air they may contaminate neighboring areas of your home or office which were previously un contaminated. Mold spores may travel via the air to other parts of a building, and can colonize clothing and furniture in clean areas.

HEPA vacuum : High Efficiency Particulate Air filtered vacuum cleaners are recommended for final cleanup of remediation areas after materials have been thoroughly dried and contaminated materials removed. HEPA vacuums are also recommended for cleanup of dust that may have settled on surfaces outside the remediation area.


Containment and Safety Equipment (Refer to Protection Levels)

Commercial wet-vacuum


Commercial Cleaning Equipment


Commercial Product Application tools.


Equipment/tools for demolition if necessary

Inspection Protocol

N.A.S.A Approved and Utilized

Indoor Air Purification System
Proven ability to reduce up to 99.99% of Particulate,
Mold, Fungi, Bacteria (incl. MRSA) and Viruses

CertificationSpaceProgram.jpg